Table of Hydration Rate/Flour Weight

Bowl capacity(L)	Model(Vertical)	Model(Spiral)	Hydration rate/Flour weight
10	KTM-10	–	45%/0.5㎏
20	HPi-20M	–	65%/1～3㎏、45%/1～1.5㎏
30	HPi-30M、HPi-30AS	–	65%/3～5㎏、45%/2～3㎏
50	HPi-50、HPi50AS	SPI-63M	65%/8～10㎏、45%/3～4㎏
60	HPi-60、HPi60AS、KTM-60	–	65%/10～12㎏、45%/4～5㎏
90	HPi-90、HPi90-AS、KTM-90	–	65%/15～20㎏、45%/7～8㎏
100	–	SPI-60FX	65%/15～25㎏、45%/8～9㎏
120	HPi-120、HPi-120L、KTM-120	–	65%/20～25㎏、45%/10～12㎏
130	–	SPI-80FX	65%/30～37㎏、45%/12～17㎏
170	–	SPI-170AV	65%/30～37㎏、45%/12～17㎏
190	–	SPI-120FX	65%/40～80㎏、45%/20～35㎏
200	HPi-200、HPi-200L、KTM-200	–	65%/40～50㎏、45%/25～35㎏
280	–	SPI-160FX、SPI-280AV	65%/60～75㎏、45%/35～50㎏
400	–	SPI-400AV	65%/130～150㎏、45%/65～75㎏

・The Kanto Mixer is designed for the best performance within the above range.
Flour weight in a recipe should be decided by reference to the above table.
・Incorrect use of the machine may cause the failure or serious accidents.
・The above information is only a guideline.
The above information can vary according to ingredients or rotation speed.

Page Back

Common-use Mixers (HPi series）

Model	10L	20L	30L	50L
HPi-20M	○	–	–	–
HPi-30M	–	○	–	–
HPi-50	–	○	○	–
HPi-60	–	–	○	–
HPi-90	–	–	○	○

Page Back

HPi series

Model	Stainless steel bowl			Rotation speed(rpm)							Optimal rotation speed (Min～Max)	Dimensions(mm)			Mixing motor 3-Phase 200V	Elevation motor 3-Phase 200V	Net weight (kg)
	Inside diameter (mm)	Depth (mm)	Full capacity (L)	1	2	3	4	5	6	7		W	D	H
HPi-20M	317	305	20	136	248	310	451				136～600	621	692	1,173	0.75kw	Manual	210
HPi-30M	360	365	30	144	246	313	442				100～445	681	765	1,236	1.5kw	Manual	285
HPi-30L	360	365	30	144	246	313	442	50	75	100	100～445	699	781	1,534	1.5kw	0.1kw	370
HPi-50	410	410	50	108	205	283	365	50	75	100	100～400	706	844	1,358	2.2kw	0.1kw	465
HPi-50L	410	410	50	108	205	283	365	50	75	100	100～400	775	950	1,675	2.2kw	0.1kw	520
HPi-60	460	430	60	98	187	258	333	50	75	100	85～335	706	861	1,358	2.2kw	0.1kw	480
HPi-60L	460	430	60	98	187	258	333	50	75	100	85～335	775	950	1,675	2.2kw	0.1kw	600
HPi-90	538	480	90	105	136	251	335	50	75	100	85～335	770	990	1,533	3.7kw	0.2kw	640
HPi-90L	538	480	90	105	136	251	335	50	75	100	85～335	792	991	1,800	3.7kw	0.2kw	670
HPi-30AS	360	365	30	144	246	313	442	50	75	100	100～445	700	787	1,294	1.5kw	0.06kw	285
HPi-50AS	410	410	50	108	205	283	365	50	75	100	100～400	723	840	1,358	2.2kw	0.1Kw	355
HPi-60AS	460	430	60	98	187	258	333	50	75	100	85～335	723	857	1,358	2.2kw	0.1Kw	365
HPi-90AS	538	480	90	105	136	251	335	50	75	100	85～335	757	984	1,429	3.7kw	0.2kw	530
HPi-120	570	540	120	76	130	195	334	50	75	100	70～335	848	1,153	1,508	5.5kw	0.4Kw	790
HPi-120L	570	540	120	76	130	195	334	50	75	100	70～335	853	1,153	1,833	5.5kw	0.4Kw	850
HPi-200	750	593	205	72	100	163	225	50	75	100	58～284	1,040	1,220	1,680	7.5kw	0.75Kw	1,230
HPi-200L	750	593	205	72	100	163	225	50	75	100	58～284	1,040	1,220	2,055	7.5kw	0.75Kw	1,330

All specifications are subject to change without any notice.
Voltage specifications can be provided separately.

Page Back

KTM series

Model	Stainless steel bowl			Rotation speed(rpm)							Optimal rotation speed (Min～Max)	Dimensions(mm)				Mixing motor 3-Phase 200V	Elevation motor 3-Phase 200V	Net weight (kg)
	Inside diameter (mm)	Depth (mm)	Full capacity (L)	1	2	3	4	5	6	7		W	D	H (min)	H (max)
KTM-90BL	538	480	90	105	136	251	335	50	75	100	85～335	911	1,292	1,410	1,960	3.7kw	0.4Kw	950
KTM-120BL	570	540	120	76	130	195	334	50	75	100	70～330	1,155	1,438	1,448	2,048	5.5kw	0.75kw	1,480
KTM-200BL	750	593	205	72	100	163	225	50	75	100	70～330	1,330	1,667	1,560	2,210	7.5kw	1.5kw	1,700

※All specifications are subject to change without any notice.

Page Back

KDM series

Model	Stainless steel bowl			Rotation speed(rpm)							Optimal rotation speed (Min～Max)	Dimensions(mm)				Mixing motor 3-Phase 200V	Elevation motor 3-Phase 200V	Net weight (kg)
	Inside diameter (mm)	Depth (mm)	Full capacity (L)	1	2	3	4	5	6	7		W	D	H (min)	H (max)
-60	460	430	67	98	187	258	333	50	75	100	85～400	911	1,204	1,356	1,785	2.2kw	0.4kw	1,000
-90	538	480	103	105	136	251	335	50	75	100	100～400	911	1,292	1,410	1,960	3.7kw	0.4Kw	1,100

※All specifications are subject to change without any notice.

Page Back

KFM series

Model	Stainless steel bowl			Rotation speed(rpm)							Optimal rotation speed (Min～Max)	Dimensions(mm)				Mixing motor 3-Phase 200V	Elevation motor 3-Phase 200V	Net weight (kg)
	Inside diameter (mm)	Depth (mm)	Full capacity (L)	1	2	3	4	5	6	7		W	D	H (min)	H (max)
KFM-50	410	410	50	108	205	283	365	50	75	100	100～400	870	816	–	2,034	1.5kw	0.2Kw	350

※All specifications are subject to change without any notice.

Page Back

Table Top type

Model	Full capacity (L)	Rotation speed(rpm)	Dimensions(mm)			Motor	Net weight (kg)
		1～4	Ｗ	D	Ｈ
KTM-10	10	50～370	540	564	788	3-Phase 200V 0.4kw	110

Page Back

SMi series

Model	Rotation speed(rpm)				Dimensions(mm)				Elevation motor　3-Phase 200v	Net weight(kg)
	1	2	3	4	W	W(max)	D	H
SMi-30	150	200	285	300	537	675	747	1.511	1.5kw	240

Page Back

UNIFILLER series

Model	Hoppe capacity (L)	Deposit Volume Transfer Volume	Run Speed (Maximum)	Dimensions(mm)			Utility		Net weight (kg)
				W	D	H (Max)	(Air pressure)	(Electric power)
Compact Power Lift	52	※1 10～530cc	60	720	850	1,970	6kg/c㎡ 100NL/min	unused	70
Compact Table Top	22		60	400	770	750			30
Compact Mobile	52		60	720	850	1,690			65
Universal 1000	52	※110～1,020cc	60	750	1,370	1,970			90
Pro 2000	79	72～2,000cc	60	810	1,448	2,083	6kg/c㎡ 170NL/min		152
XL Depositor	140	110～4,200cc	60	775	1,422	957			112
Hopper Topper Econo	Residual quantity sensor	※３ 40L/Minute(Max)		830	720	1,950	6kg/c㎡ 270L/min	single- phase 100V	38
Hopper Topper Power Lift				830	720	※２2,710			45

※１　Changing deposit volume may require replacement of main cylinder and piston.
※２　Maximum height above is measured when used with standard device (lifting position).
※３　40L/min is measured when used with water. Transfer volume varies depending on ingredients.
※　All specifications are subject to change without any notice.

Page Back

SPI series

Model	Optimal flour weight (hydration rate 70％) (kg)	Specifications			Dimensions(mm)
		Mixer head fixed/ Mixer bowl fixed 2 timers equipped	Mixer head hydraulic elevation/ Mixer bowl hydraulic detachment 2 timers equipped	Electric power (kw)	D(mm)	W(mm)	H(mm)	HW(mm)	Net weight (kg)
SPI-63M	12.5	○		2.2	1,002	560	1,230	1,380	215
SPI-60FX	25	○		5.2	1,100	670	1,350	1,780	350
SPI-80FX	37.5	○		5.2	1,215	710	1,510	1,850	520
SPI-170AV	37.5		○	6.8	1,617	1,074	1,306	1,719	900
SPI-120FX	50	○		10.1	1,265	780	1,510	1,900	600
SPI-160FX	75	○		14.5	1,400	890	1,545	2,040	700
SPI-280AV	75		○	15	2,065	1,256	1,510	2,010	1,350
SPI-280EB	75			17.8	2,615	1,170	1,677	2,525	1,750
SPI-400AV	125		○	19	2,295	1,375	1,535	2,100	1,500
SPI-400EB	125			22	2,870	1,370	1,777	2,821	2,100

※The Kanto Mixer is designed for the best performance within the above range. Optimal flour weight in a recipe should be decided by reference
to the above table. Incorrect use of the machine may cause the failure or serious accidents.
※The above information is only a guideline.
The above information can vary according to ingredient or rotation speed.
※All specifications are subject to change without any notice.

Page Back

PHEBUS series

Model	Bowl capacity (L)	Maximum flour weight (kg)	Dimensions(mm)			Electric specifications (V)	Electric power (kw)	Net weight (kg)
			L	W	H
Phebus 1032	30	7	692	558	598	Single-phase 200V 50/60Hz	0.75	75
Phebus 1595	95	12.5	980	740	990	3-phase 200V 50/60Hz	3.1	160
Phebus 2172	170	25	1,470	875	1,500	3-phase 200V	6.0	420
Phebus 2332	330	75	1,670	865	1,500	3-phase 200V	6.0	460

*Maximum flour weight varies depending on types of flour. Maximum flour weight above corresponds to optimal capacity in the case of hydration
rate 70%.

Page Back

Multi Sifter

Model	Dimensions(mm)			Tank capacity(L)	Electric specifications	Electric power	Air consumption	Maximum weighing volume	Maximum transfer volume	Net weight (kg)
	Ｈ	Ｗ	Ｄ
Multi Sifter (MPS-10)	1,970	1,450	600	Approx 75 (Flour weight 35kg)	100V 50/60Hz Single-phase	0.4kw	5.0kg/c㎡ 100NL/min	10Kg/time	Approx 14kg (Speed change available by inverter control)	190kg

Page Back

Bowl Lifter

Ｄ type series

Model	Maximum capacity (kg)	Tipping angle	Dimensions(mm)			Electric power (kw)	Feeding method	Electric specifications	Net weight (kg)
			Ｗ	Ｄ	Ｈ
50	100	135	1,100	1,070+α	535+β	0.4	ChainvMotorized	3-Phase 200V	260
60			1,200	1,270+α	570+β				280
90	150		1,260	1,335+α	640+β				300
120			1,270	1,380+α	750+β				330
205	250		1,540	1,835+α	835+β	0.75			380

Ｂ type series

Model	Maximum capacity (kg)	Lifting height (mm)	Dimensions(mm)			Feeding method	Battery	Net weight (kg)
			Ｗ	Ｄ	H (Lifting position)
50	150	1,800	980	1,140	2,400	ChainvMotorized	12V 100AH	190
60
90
120	300		1,400	1,480				210
205

*[A]: Required tipping distance [B]: Required tipping height
*Net weight above is measured with tipping distance 500 mm and tipping height 1,500 mm.

Page Back

Bagel Former

Model	Maximum Volume (chunk)	Dimensions(mm)			Net weight (kg)
		Ｗ	Ｄ	Ｈ
KSF-300S	3,600	765	2,900	1,450	460

Page Back